Tapping chucks for synchronisation SK 50 - M3-M12 - 79 | ER 16Application: For machining centres with synchronous spindle. Note: Synchro tapping chucks compensate synchronisation errors. Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks. A possible increase of axial force during the tapping process is reduced to a minimum. Suitable for internal coolant. Coolant pressure up to

Calibration of the angular position of spindles of milling-turning centres

5V AA Batteries * 3 ( Do not use low self-discharge battery )

5 mm less than nominal

Tensile strength in the core of min

T-nuts 18 mm

For adaption from SK/ISO to PSC (ISO 7388-1 to ISO 26623-1)

Adapters HSK / PSK with axial clamping

vice clamps

The optimal storage and save transport of CNC tools

Wherever reduced interference contours are required

Excellent concentricity in the system (chuck + collet + clamping nut)

alloyed steel