BP505-34 | BP505 Cyan Bandpass FilterThe MidOpt BP505 34 cyan blue bandpass filter is a single substrate, hard coated filter designed to match the output of most cyan LEDs. Coupled with the spectral sensitivity of most CCD CMOS sensors in use today that also peak in this range, using this filter can result in images that are especially bright and very high in contrast. It is particularly useful for line scan and wide angle applications. Technical Specifications Specifications + Useful

13 mm Fov @ 1

LL137D-0662524 Specifications:

Also available for 1

If you still see dust or contaminants

TC12M048-F Technical Specifications:

Gigabit Cable with RJ45 Straight connector to 7 meter Robotic (CAT 5e) cable to RJ45 Vertical W/Thumbscrews connector

Weight 245g (10

The MidOpt ND030-82 is an absorptive neutral-density filter with an optical density of 0

The R80-470-N is in the 470nm Blue color and features a lens beam angle of 14 Degree

-Configurations can also be supplied for mounting in front of UV LED light sources

Electrical Characteristics + Voltage 24 VDC V Max Input Power Constant On 72 W Max Strobe Latency 10 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 30 ms Max Overcurrent Strobe Current 20000 mA Max Overcurrent Strobe Latency 6 us Max Overcurrent Strobe Duration 50 ms Max Overcurrent Strobe Frequency 4000 Hz Max Overcurrent Strobe Duty Cycle 10 % Min Overcurrent Strobe Duration 30 ms Max Overcurrent Strobe Input Power 480 W Max Duty Cycle 100 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 30

The MidOpt BP340-43 is a UV Bandpass filter that is economical yet a highly transmissive/high contrast alternative to far more costly thin-film interference filters