Solder wire, solid and flux cored. Specification and test methods - Classification and performance requirements1 Scope This part of ISO 12224 specifies a coding system for the classification and designation of solid and flux cored solder wire, and the performance requirements to be met by flux cored wire and its constituents. Requirements for sampling, labelling and packaging are also specified. Annex A specifies a method for the solvent extraction of flux incorporated in flux cored solder wire. The solution so obtained may be used for testing purposes. Annex

BS EN 1363-1 on fire resistance tests is relevant to:

— components and discrete items

for applications above 120 °C

and Undervoltage close inhibit for specific use in D

If this is the case

BS EN 14937-2 is a European standard and a part of the BS EN 14937 series that discusses the FAAS method for copper and copper alloys

BS EN 60297-3-108 contains a sub-rack standard that is externally compatible with IEC 60297-3-100 but internally largely incompatible with IEC 60297-3-101

BS EN 1005-2:2003+A1:2008 Safety of machinery

A cable harness is an assembly of cables

Bent-beam specimens are usually tested under nominally constant strain conditions but nominally constant load conditions may be employed

PD ISO/TR 19688 on Rotodynamic pumps is applicable to:

BS EN 61158-5-14 is related to other standards in the set as defined by the “three-layer” fieldbus reference model described in IEC 61158-1