NA6907-ZW-XL INA Machined Needle Roller Bearing - 35X55X36MMThe NA6907 ZW XL is a Standard Duty Open Type, Double Row Machined Needle Roller Bearing with an Inner Ring. The Inner Ring is separable from the Cage and Outer Ring, while the Outer Ring is fixed to the Cage and has a lubrication groove and an oil hole. Bearings with an Inner Ring are used when the shaft being used isn't heat treated and finished by grinding. In caged Needle Roller Bearings like this one, the Needles are precisely guided by the Cage

One Flange on Inner Ring Light 20mm - Bore Size Extra Capacity Design Glass Fibre Reinforced Polyamide Cage Normal Internal Clearance

the NJ211ECJ SKF is made to ensure you get the maximum performance out of your machinery

This 3208A 2RS1/MT33 bearing is a metric double row angular contact bearing with a rubber seal on both sides of the bearing filled with lithium grease

This NJ204-E-TVP2-C3 bearing is a single row cylindrical roller bearing

This 2308JC3 bearing is a double row

6917 c3 Bearing Steel Thin Section with a Bore Diameter of 85mm Open Type Internal Clearance Greater than Normal

Cone Reference Cup Reference jw 6049 jw 6010 Metric Series Cone Reference Metric Series Cup Reference

The NU2236ECML/L4BC3 SKF bearing features a cylindrical roller design

key benefits are

Light 28mm - Bore Size Snap Ring Groove with Snap Ring Normal Internal Clearance

This 6024-ZZ bearing is a shielded deep groove ball bearing with a Normal Radial Internal Clearance Greater

63 18 z c3 Metric