Iron ores. Determination of titanium. Diantipyrylmethane spectrophotometric method1 Scope This International Standard specifies a spectrophotometric method using diantipyrylmethane for the determination of the mass fraction of titanium in iron ores. This method is applicable to a mass fraction range of 0,02 % to 4,0 % of titanium in natural iron ores, and iron ore concentrates and agglomerates including sinter products.

ISO 2493‑2 is used to determine the bending moment required to deflect the free end of a 38 mm wide vertically clamped specimen by 15° when the load is applied at a bending length of 50 mm

as a forerunner to the development of full hydro-meteorological data collection standards

This helps in designing and constructing these wire terminations of capacitors and resistors

BS EN 12522-1:1998 Furniture removal activities

Equipment for lifting tubular from and onto a vessel

BS EN 61076-4-115 also provides users with test schedules to verify the performance characteristics of connectors which ensures their reliability

KF apparatus drift

who has to be aware of the behaviour of rubber additives at elevated temperatures

dimensional configuration

The following equipment is covered in this standard:

BS EN ISO 3071:2020 includes some editorial changes with reference to ISO 3071:2005

A maximum continuous cable temperature not exceeding the insulation material properties