Camlok PP Pile pulling clampsThe PP pile pulling clamps are designed to pull out driven piles or trench shielding. The clamps have a narrow opening and a deep slot to ensure that the pile is gripped firmly. It is extremely difficult to determine the forces required to pull out driven piles, so it is recommended that a load indicator is used to ensure the WLL of the clamp is not exceeded. The PP clamp is supplied as standard with a double locking mechanism to ensure that the clamp

The versatile tool for lifting

versatile device

Material strength: body wall 5 mm and fork sleeves 6 mm especially for heavy materials

The clamps are also fitted with a ‘Quick-Open’ lever for ease of loading and unloading

Solid rubber tyres

NOTE: A plastic chain collector included for up to 7m of lift height

Can be secured to prevent slipping from the forks

These clamps are sold and must be used in pairs

the greater the slope angle

and they come complete with a 3-legged chain sling (the working load limits shown are based on a set of three clamps)

The TJC twin jaw vertical plate clamps have been specifically designed for lifting materials with low minimum weight but large thickness

Requires little storage space