Vario Prism Ø 50 90°/120° with screwed-in collar PolyamideVario Prism 50, suitable for both rounded and 45 twisted square pipes with a diameter up to 80 mm, due to its 90 and 120 angles. In addition, the prism can be universally used for all 16 mm boreholes. The prism with screwed in collar can be fastened in the boreholes. For free positioning of the prism independent of the hole grid you can easily unscrew the collar from the prism. If necessary, the working height of the prism can be varied by a prism

Product number: 160396

Product number: 160660

The matching 6 mm hex wrench is available as Item No

The Short Arbor can be adjusted with an open-end wrench or a hex wrench

10) Configuration of the welding cell: - double door access to cell - Welding screens on the sides - Aluminum composite panels on the back - Partition wall for division into two working areas - Roof with connection possibility for welding fume extraction unit - LED progress indicator outside - Installation height inside the cell approx

Product number: 160650

enables fast clamping without bolting or the use of tools

Product number: 160420

The Plate is fixed onto the table using clamping bolts

The hole located in the center is used to quickly and safely fasten the screw clamp

Product number: 160060

applicable as a stop for large profiles