Ti 4-5/8" Jacob's Ladder StrapHyper Racing # 04 6063 Made from super strong 6AL4V titanium. 6AL4V titanium is about 2 1 2 times stronger than 6061 T6 aluminum. 4 5 8" distance from center of hole to center of hole. 3 16" thick x 3 4" wide with 5 16" holes. Use this strap on the top in combination with the 5 3 8" strap on the top to achieve a lower roll center for a tighter car. Fits all of our 10" Jacob's Ladders.

1-3/4" x 53" Z-Link Splined Rear Axle for 600 Micro Sprint fits almost all Z-Link Chassis including PMP

Hyper Racing # 01-0921

1/4” female rod ends (2) and hardware

058" wall chromoly with right and left threaded inserts welded in

5" distance from center of hole to center of hole

enhance oiling capabilities

Hyper Racing # 05-210

and 270cc Sprints

080” king pin bosses angled back for 10 degrees caster

Allows the removal the entire brake floater assembly

Black Rods are 7/8" O

Hyper Racing's exclusive Jacob's Jacker ® (patent pending) is a system that allows the remote adjustment of the Jacob Ladder's roll center while you are in the cockpit on the race track