Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Frame document1 Scope ISO 10848 (all parts) specifies measurement methods to characterize the flanking transmission of one or several building components. These measurements are performed in a laboratory test facility or in the field. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as the normalized flanking level difference and or normalized flanking impact sound pressure

mini-cranes and vehicle-mounted self-erecting tower cranes

— jointing of pipe lengths by means of electrofusion joint

Updating on the basis of the 2009 edition of EN 13445

Coverage of Essential Requirements of EC Directives

a) allocate each requirement under each pre-pay solution

PAS 202 specifies requirements for commercial platform operators providing a service within the sharing economy

Products can only be tested at a concentration of 80 % or less (97 % with a modified method for special cases) as some dilution is always produced by adding the test organisms and interfering substances

BS 6736 describes hand signals for use in agricultural operations

aerospace and automotive

and package architecture for CIM European market model exchange profile

S460J2W and S460J4W were added to Tables 1 to 5

pressure exceeds 6 bar absolute or for breathing