FLUSH JOINT DOWNPIPE ADJUSTABLE SWANNECKS - 63mm DIAFlush Joint 63mm diameter aluminium adjustable swannecks are used to make the connection from the gutter outlet into the downpipe system. They are set at 112. 5 deg angles and the bottom bend of the swanneck can be site cut to achieve the desired projection from the gutter outlet to the wall face. Offered in 3 adjustable projection sizes (90 250mm, 90 500mm & 90 1000mm). Used for connecting to gutter outlets. Bottom bend is cut down on site to suit

76mm diameter Flush Joint aluminium downpipe branches with the arms set at 92

Connects to 72x72mm Traditional downpipes

This angle creates smooth turns in wall coping runs

A separate jointer (part code GB2) is required at the connection points

Coated with an external architectural grade polyester powder coating

leak-proof connection

The spigot connection on the bottom of the hopper fits directly into a 63mm Flush Joint pipe length

76mm / 3" diameter pipe

Flow capacity: 2

Architectural grade polyester powder coating ensures prolonged protection from rust

9 l/s at end

2 screws required for each fascia bracket