Portrait Dual Latching Footswitch with LEDsThis pedal is a dual latching footswitch for switching channels effects on an amp that takes a dual latching footswitch with a stereo 1 4" TRS cable. Each footswitch has an internal slider switch to let you set the LED state to the correct state for the function it's footswitch is switching. The front switch is wired to the tip connection of the stereo TRS output, the rear switch is wired to the ring. The pedal is passive so will work without power,

the third switch activates D overriding whichever input is selected on the first two switches

You will need a mono cable to connect the pedal to your amp

For our painted black v2 click here

Connectors: ¼" 90 degrees angled audio plug

This pedal is a dual latching footswitch for Vox amps that use a VFS2A footswitch

TC Electronic Small Stompboxes

Here's a single true bypass loop with an additional switch to select channels (for amps accepting latching channel switching)

I can use a stereo socket and wire it the ring if needed

Solo and Tap functions

The LED is powered via the Strymon pedal

The first switch (A/B) lets you select either loop A or B

Another use of angled risers is to raise the rear of a pedal for better access to rear footswitches